Glass Skin Rejuvenation User Manual

Von Chloe from glàscy

1. Setup

2. Before the Treatment

3. Micro-Infusion Procedure

4. Post-Treatment Care

5. Cleaning & Storage

6. Safety Instructions


1. Setup

The Glass Skin Rejuvenation System uses 24K gold-plated, ultra-fine needles to gently "stamp" the skin. This delivers a highly effective dual-action result: It "tricks" the skin by activating the body's natural healing process. At the same time, it creates invisible micro-channels in the top layer of the skin, allowing active ingredients to penetrate more efficiently for visible, faster results.

2. Before the treatment

2.1: Tie your hair back carefully, ensuring it is completely away
from your face throughout the treatment to prevent any
interference or contact with the skin, as even minor strands
can disrupt the process.

2.2: Thoroughly cleanse your skin twice to remove all traces of makeup, lotions, and impurities, ensuring a clean surface for optimal treatment results. Dirt, oil, or hair touching the face can increase the risk of irritation or infection.

2.3: Prepare the treatment area by sterilizing the surface and keeping a disinfectant on hand. During the procedure, avoid touching anything other than your skin or the device to prevent cross-contamination.

3. Micro Infusion Procedure

3.1 Fill in the serum:
Open the chamber, remove the rubber stopper, and pour the serum inside. Securely close the device. Optionally, you can mix two serums and fill the chamber halfway.

3.2 Turn the device over:
Allow the device to stand upside down for 1-2 minutes while you wash your face and clean your hands.

3.3 Start the micro-infusion process:
Once the serum reaches the needles, remove the cap and begin in the center of your face. Work outward, overlapping each stamping motion by 50% to ensure full facial coverage.

3.4 Adjust the angle:
Ensure that the serum remains on the needles to be infused into the skin during stamping, maintaining a consistent application for optimal results. Adjust the angle slightly if necessary.

3.5 Remaining serum:
Apply any remaining serum to your face and neck, and allow it to absorb overnight for optimal nutrient absorption, as this helps to enhance the overall effectiveness of the treatment.

3.6 Disposal:
After the treatment, detach the needle head and dispose of it properly.
Use a new, sterile needle head for each application.

4. Post Treatment Care

  • Wash your face the day after the treatment using a gentle cleanser and apply a nourishing moisturizer.
  • Avoid makeup for at least 24 hours; if necessary, use products designed for sensitive skin.
  • Steer clear of harsh ingredients such as acids, and refrain from swimming, saunas, and steam baths for 24 hours.
  • Light redness and irritation are normal and should subside quickly.
  • Keep your skin hydrated to minimize flakiness and feelings of tightness.
  • Avoid intense physical activities and exercise in the first 24 hours post-treatment, as sweat and bacteria can provoke adverse reactions. 

5. Cleaning & Storage

5.1 Cleaning:
Detach the needle head along with its cap and dispose of it properly. Rinse the chamber thoroughly with water and a mild cleanser, then let the device dry completely on a clean surface. Attach the new needle head without removing the cap, making sure your hands are clean throughout the process.

5.2 Storage:
Store the device in its box between treatments until you are ready to use it again. Ensure that both the device and the needle heads are kept in a secure, dry environment, away from heat, moisture, and bacteria. It is not recommended to store them in the bathroom. Always keep the device out of reach of children.

6. Safety Instructions

  • This treatment is intended solely for skincare and is not designed to diagnose, treat, cure, or prevent any medical conditions.
  • If you have skin disorders, allergies, are pregnant, or breastfeeding, it is essential to consult a healthcare professional before use.
  • Additionally, if you have a metal allergy or any other health concerns, obtaining medical advice before using the treatment is crucial.
  • Misuse, applying the treatment to unintended body areas, or not following the provided instructions could result in undesired effects, and Glascy ApS will not accept any responsibility for such outcomes.

 

 Ingredient INCI Name CAS Function
Aqua 7732-18-5 Solvent
Propanediol 504-63-2 / 26264 Solvent, viscosity
Propylene glycol 57-55-6 Humectant, skin
Oligopeptide-1
Skin conditioning
Sodium hyaluronate 9067-32-7 Humectant, skin
Betaine 107-43-7 Antistatic, hair conditioning
Beta-glucan 26874-89-5 Skin conditioning
Niacinamide 98-92-0 Smoothing
Centella asiatica extract 84696-21-9 Cleansing, skin
Cereus grandiflorus flower extract 8007-78-1 Skin conditioning
Ubiquinone 303-98-0 / 1339 Antioxidant, skin
Glyceryl polymethacrylate 28474-30-8 /  Viscosity controlling
Propylene glycol 57-55-6 Humectant, skin
Aloe ferox leaf extract 84649-82-1 Skin conditioning
Carbomer 9007-20-9 / 9003 Emulsion stabilising, gel
Ethylhexylglycerin 70445-33-9 Deodorant, skin
Phenoxyethanol 122-99-6 Preservative
Allantoin 97-59-6 Skin conditioning, skin
Chrysanthemum indicum extract 223748-24-1 Skin conditioning
Copper tripeptide-1
Skin conditioning
Acetyl hexapeptide-8 616204-22-9 Humectant, skin
PVM/MA Copolymer 9011-16-9 Antistatic, binding


Weiterlesen

Kostenloser Versand

Wir bieten kostenlosen weltweiten Versand für alle Bestellungen und einfache Rücksendungen

Benötigen Sie Hilfe?

Unser Kundenservice hilft Ihnen gerne weiter, info@glascy.com

Sichere Bezahlung

Ihre Zahlungsinformationen werden sicher verarbeitet.

Haben Sie Fragen? Wir haben Antworten.

Wir haben zwei perfekt aufeinander abgestimmte Welten kombiniert, um Ihnen die neuesten Innovationen der kosmetischen Hautwissenschaft zu bieten.

Unser Kundensupport ist von Montag bis Freitag von 8:00 bis 20:30 Uhr erreichbar.Durchschnittliche Antwortzeit: 24h
Holen Sie sich das Valentinstagsangebot: Bis zu 50 % Rabatt auf Behandlungen